(1) Dual backup of receiving card is supported, and the other signal is replenished in real time when the first signal is abnormal, so as to ensure that the signal of display screen is normal and not black.
(2) Double backup of power supply is supported, and the other power supply is replenished in real time when one power supply is abnormal to ensure that the power supply of display screen is normal and not black screen.
Module, receiving card, switching power supply, can achieve full pre-maintenance and after-maintenance.
Different types of LED module:
(1) SMD: LED lamp surface mount technology, wide scope of appllication, covering indoor & outdoor LED display.
(2) COB: The surface of the LED lamp filled with composite epoxy resin to enhance protection performance, reduce more and inprove contrast an consistency. Using on small pitch products with COB process can realize indoor and outdoor high definition display.
(3)GOB：By special process, the conventional LED display PCB board and its patch lamp beads and double fog surface optical treatment achieve the frosted effect of the LED display surface, improve the existing protection technology of the LED display, and innovate the conversion and display of the display point light source from the surface light source.
* Die casting aluminum panel.
* Panel Size: 640*480mm/320*240pixel.
* High brightness 3840Hz refresh rate.
* Nova star/Colorlight/Linsn control system indoor outdoor led screen.
* Specially use for TV studio, conference center,monitoring center and cinema, museum, ect.
* Seamless connection, high contrast ratio, high refresh rate, 16 bit high gray level.
Cabinets and modules are separately packed, first install cabinets and then install modules. Cabinets and modules are wirelessly connected.
Smart adjust, unique alignment feature ensure the video wall is perfectly aligned and seamless, the flatness tolerance of the screen is less than 0.1mm.
The display is a cold light source, relying on semiconductor light, ultra-low power.
The led screen characteristics are mainly reflected in the appearance of such a green light source, no strobe, no radiation pollution, no infrared and ultraviolet components.
Ready made brackets, ensuring the whole screen flat and seamless.
Just 4 steps can finish the installation:
（1） The mounting frame is nailed to the wall.
（2） The empty cabinet is installed on the shelf.
（3） The power supply and receiver card are installed.
（4） The module is attached to the successful installation
1. Packaging:
(1) Carton case use to packaged LED module.
(2) Plwood and Flight case use to package LED cabinet.
2. Shipping:
(1) Express.
(2) Sea transportation.
(3) Air transportation.
3. Payment
(1) T/T.
(2) Western Union account.
(3) Paypal account.
(1) Dual backup of receiving card is supported, and the other signal is replenished in real time when the first signal is abnormal, so as to ensure that the signal of display screen is normal and not black.
(2) Double backup of power supply is supported, and the other power supply is replenished in real time when one power supply is abnormal to ensure that the power supply of display screen is normal and not black screen.
Module, receiving card, switching power supply, can achieve full pre-maintenance and after-maintenance.
Different types of LED module:
(1) SMD: LED lamp surface mount technology, wide scope of appllication, covering indoor & outdoor LED display.
(2) COB: The surface of the LED lamp filled with composite epoxy resin to enhance protection performance, reduce more and inprove contrast an consistency. Using on small pitch products with COB process can realize indoor and outdoor high definition display.
(3)GOB：By special process, the conventional LED display PCB board and its patch lamp beads and double fog surface optical treatment achieve the frosted effect of the LED display surface, improve the existing protection technology of the LED display, and innovate the conversion and display of the display point light source from the surface light source.
* Die casting aluminum panel.
* Panel Size: 640*480mm/320*240pixel.
* High brightness 3840Hz refresh rate.
* Nova star/Colorlight/Linsn control system indoor outdoor led screen.
* Specially use for TV studio, conference center,monitoring center and cinema, museum, ect.
* Seamless connection, high contrast ratio, high refresh rate, 16 bit high gray level.
Cabinets and modules are separately packed, first install cabinets and then install modules. Cabinets and modules are wirelessly connected.
Smart adjust, unique alignment feature ensure the video wall is perfectly aligned and seamless, the flatness tolerance of the screen is less than 0.1mm.
The display is a cold light source, relying on semiconductor light, ultra-low power.
The led screen characteristics are mainly reflected in the appearance of such a green light source, no strobe, no radiation pollution, no infrared and ultraviolet components.
Ready made brackets, ensuring the whole screen flat and seamless.
Just 4 steps can finish the installation:
（1） The mounting frame is nailed to the wall.
（2） The empty cabinet is installed on the shelf.
（3） The power supply and receiver card are installed.
（4） The module is attached to the successful installation
1. Packaging:
(1) Carton case use to packaged LED module.
(2) Plwood and Flight case use to package LED cabinet.
2. Shipping:
(1) Express.
(2) Sea transportation.
(3) Air transportation.
3. Payment
(1) T/T.
(2) Western Union account.
(3) Paypal account.
