loading
P3
SZXGC
8528591090
| Availability: | |
|---|---|
Lightweight Design: Our use of aluminum die-casting technology results in a product weighing approximately 10 kilograms, making it highly portable and simple to set up or take down.
Superior Refresh Rate: With a refresh rate exceeding 3840Hz, our display ensures images are presented without wrinkles or lines, providing a consistently smooth and stable viewing experience.
Enhanced Brightness Control and Gray Scale: Featuring a 16-bit gray scale, our technology delivers outstanding performance even when brightness is dimmed to 25%, guaranteeing a flawless visual presentation without any flicker.
User-Friendly Installation: Installation is a breeze thanks to the thoughtful design of our die-cast cabinets, which allows for an easy setup process similar to assembling building blocks.
Robust Environmental Protection: Rated at IP65, our products are designed to operate reliably in various environments while ensuring user safety.
Brightness Optimized for Different Settings: For outdoor applications, our transparent LED displays offer a range of 2500 to 5500 candelas per square meter, while indoor advertising screens provide up to 1200 candelas per square meter, ensuring visibility and impact in both settings.
1: Fixed on the Frame
2: Hanging
Installation Step:
1: Cabinet adjustment: Adjusting the lock of the cabinet to the maximum position
2: Steel structure: Fixing the steel tube which are 40*40mm at a distance of 1m and weld a horizontal steel tube at the bottom to support the bottom cabinet of the display. The steel structure is cuted according to the height and width of display.
3: Cabinet assembly in left and right
1. Place the girst cabinet on horizontal steel tube
2. Place the second cabinet next to the first cabinet tightly.
3. Place the second cabinet next to the first cabinet tightly.
4. Twist the lock up and get stuck.
5. Twist the lock down and lock it.
4: Conecting plate and lock
1. Find the connector
2.Lock the cabinet joint with the locking plate
3. Fill the first layer with above method
4. Algn the cabinet with the locating pin and place the second layer
5. Put the lock up and use the locking plate to catch the lever groove
5: Cabinet lock
1. Tightly lock up
2. Twist the lock to the right, get the cross pin stuck
3. Twist the lock to left and lock
4. Lock the connection piece
5. Assembling the above screen.
Lightweight Design: Our use of aluminum die-casting technology results in a product weighing approximately 10 kilograms, making it highly portable and simple to set up or take down.
Superior Refresh Rate: With a refresh rate exceeding 3840Hz, our display ensures images are presented without wrinkles or lines, providing a consistently smooth and stable viewing experience.
Enhanced Brightness Control and Gray Scale: Featuring a 16-bit gray scale, our technology delivers outstanding performance even when brightness is dimmed to 25%, guaranteeing a flawless visual presentation without any flicker.
User-Friendly Installation: Installation is a breeze thanks to the thoughtful design of our die-cast cabinets, which allows for an easy setup process similar to assembling building blocks.
Robust Environmental Protection: Rated at IP65, our products are designed to operate reliably in various environments while ensuring user safety.
Brightness Optimized for Different Settings: For outdoor applications, our transparent LED displays offer a range of 2500 to 5500 candelas per square meter, while indoor advertising screens provide up to 1200 candelas per square meter, ensuring visibility and impact in both settings.
1: Fixed on the Frame
2: Hanging
Installation Step:
1: Cabinet adjustment: Adjusting the lock of the cabinet to the maximum position
2: Steel structure: Fixing the steel tube which are 40*40mm at a distance of 1m and weld a horizontal steel tube at the bottom to support the bottom cabinet of the display. The steel structure is cuted according to the height and width of display.
3: Cabinet assembly in left and right
1. Place the girst cabinet on horizontal steel tube
2. Place the second cabinet next to the first cabinet tightly.
3. Place the second cabinet next to the first cabinet tightly.
4. Twist the lock up and get stuck.
5. Twist the lock down and lock it.
4: Conecting plate and lock
1. Find the connector
2.Lock the cabinet joint with the locking plate
3. Fill the first layer with above method
4. Algn the cabinet with the locating pin and place the second layer
5. Put the lock up and use the locking plate to catch the lever groove
5: Cabinet lock
1. Tightly lock up
2. Twist the lock to the right, get the cross pin stuck
3. Twist the lock to left and lock
4. Lock the connection piece
5. Assembling the above screen.
